RESTORATION OF GEAR SHAFT TEETH OF MILLS OF MILLS MSHR 2700 × 3600 IN THE CONDITIONS OF JSC "AGMK" SHAFT TSRMZ

Authors

  • Mirzaraimov Ziyodulla Acrom coals Master's student, Department of Technological Equipment Engineering, National Research Technological University "MISiS", Russian Federation, Moscow
  • Khozhiev Shokhrukh Toshpulatovich Senior Lecturer, Department of Metallurgy, Tashkent State Technical University, Uzbekistan, Tashkent
  • Munosibov Shohrukh Muhiddin coal Assistant, Department "Metallurgy", Tashkent State Technical University, Almalyk branch, Uzbekistan, Tashkent
  • Munosibov Shokhjakhon Muhiddin coal student, department "Metallurgy", Tashkent State Technical University, Almalyk branch, Uzbekistan, Tashkent
  • Irsalieva Dilnoza Bakhtiyor kizi student, department "Metallurgy", Tashkent State Technical University, Uzbekistan, Tashkent

Keywords:

Mill, pinion shaft, tangential gear meter, surfacing, pitting

Abstract

In this work, the options for the restoration of the gear shaft of the mill MSHR 2700 × 3600 were considered. A 3D model was constructed in Autodesk Inventor. The selected recovery option increases the operational efficiency of the pinion shaft in mills and reduces the recovery time of the mill. In the course of studying the selected option, a technological process for restoring the pinion shaft was developed.

Downloads

Published

2021-03-30

How to Cite

Mirzaraimov Ziyodulla Acrom coals, Khozhiev Shokhrukh Toshpulatovich, Munosibov Shohrukh Muhiddin coal, Munosibov Shokhjakhon Muhiddin coal, & Irsalieva Dilnoza Bakhtiyor kizi. (2021). RESTORATION OF GEAR SHAFT TEETH OF MILLS OF MILLS MSHR 2700 × 3600 IN THE CONDITIONS OF JSC "AGMK" SHAFT TSRMZ. European Scholar Journal, 2(3), 241-247. Retrieved from https://scholarzest.com/index.php/esj/article/view/418

Issue

Vol. 2 No. 3 (2021): ESJ

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.